Water purification information

Cleaning method for RO membrane of reverse osmosis pure water equipment

Views : 83434
Update time : 2021-09-01 11:52:45
The RO membrane needs to be cleaned after the use of reverse osmosis pure water equipment for a long time. The common method is chemical cleaning. During the use of the laboratory ultrapure water machine, the RO reverse osmosis membrane will gradually become contaminated as the use time increases. Users need to maintain it regularly before normal use. In addition to replacing the RO reverse osmosis membrane, cleaning can also be improved Its service life is long, and the cost of frequent replacement of consumables can also be reduced. And chemical cleaning is one of the most suitable methods.
When cleaning the  reverse osmosis membrane of a water purifier with chemical agents, problems that need to be paid attention to

1. Add enzyme detergent and treat the membrane with enzyme detergent. It is particularly effective for organic pollution, especially for protein, oil and other organic pollution. If the cleaning effect is better at 50℃-60℃, it is generally running 10 After a day or half a month, use 1% enzymatic detergent to clean the membrane once at low pressure. Since the concentration of enzymatic detergent used is low, the immersion time is required to be longer.

2. Citric acid solution, use 1%-2% citric acid aqueous solution to wash the membrane continuously or cyclically under high pressure or low pressure. This method has a good cleaning effect on Fe(OH)3 pollution.

3. Concentrated salt water, it is effective to clean the membranes that are severely punished by limb pollution. This is because high-concentration salt water can weaken the interaction between colloids and promote colloidal aggregation to form micelles.

4. Hydrogen peroxide solution, such as diluting 0.5L, 30% H2O2 with 12L deionized water, and then cleaning the membrane surface. This method is particularly effective for organic pollution.

5. Water-soluble emulsion is very effective for cleaning membranes contaminated by oil and iron oxide, usually for 30-60 minutes.

Another is to use physical principles to perform cleaning. Usually, the physical cleaning method is to use low-pressure and high-flow membrane permeable water to rinse for 30 minutes, which can restore the membrane’s water permeability to a certain extent, but after a long time, the water permeability If it is still falling, you can also use a mixed fluid of water and air to wash the membrane surface at low pressure for 15 minutes. This method is effective for cleaning the membrane contaminated by organic matter in the initial stage.
Related News
Read More >>
Do you know what is the most reasonable recovery rate setting for RO system? Do you know what is the most reasonable recovery rate setting for RO system?
Oct .28.2024
When discussing design options with peers and customers, the question of the reasonableness of the system's recovery rate setting often comes up. The essence of the problem is to set the recovery rate has exceeded the upper limit of the recovery rate of the system (limit recovery rate).
Do you know the difference between ultrapure water equipment and pure water equipment? Do you know the difference between ultrapure water equipment and pure water equipment?
Oct .28.2024
Do you know the difference between ultrapure water equipment and pure water equipment?
Here Susan will let you know what the differences between them.
Reverse osmosis ultrapure water equipment common faults (with solutions) Reverse osmosis ultrapure water equipment common faults (with solutions)
Oct .25.2024
Reverse osmosis ultrapure water equipment is a kind of equipment used to remove impurities and pollutants in water, but it is inevitable that it will encounter some problems in the course of its usual operation and use, so how should it solve these problems? The following are some common water purifier problems with corresponding solutions:
​​​​​​​Factors affecting the effectiveness of activated carbon filtration and methods of use ​​​​​​​Factors affecting the effectiveness of activated carbon filtration and methods of use
Oct .25.2024
​​​​​​​Factors affecting the effectiveness of activated carbon filtration and methods of use
The adsorption capacity of activated carbon is related to the water temperature and water quality.The adsorption principle of activated carbon。